Skip to main content

CRC

In order to use CRC with Audio for VATSIM, download the latest version of CRC and either the Audio for VATSIM standalone client or the VectorAudio client.

Step 1: Download and install the latest version of CRC.

Step 2: Download and install the Audio for VATSIM standalone client or the VectorAudio client.

Step 3: Connect to the network using CRC in the normal way.

Step 4: Launch the Audio for VATSIM or VectorAudio software.

The first time you run the audio client, open the settings window and calibrate your microphone. When talking, the bar should be bouncing into the green band. If it does not, make sure you increase or decrease your mic volume using the mic volume slider.

AFV Client Settings:

Standalone client settings

VectorAudio Client Settings:

VectorAudio client settings

Don't forget to assign a push to talk key!

For further information refer to Section 6: Controlling with AFV in the Audio for VATSIM Manual linked on the top left of this page.

vATIS for AFV is available here